How to configure the camera with WiFi
There are many Camera APP in the market. for the home wifi Camera. we can find Yoose camera, YCC365 Camera, V380 Camera, Camhi Camera, Tuya Camera, YIOT Camera etc.
But for the first time users. it is not easy to install the camera very easily. here we have to say. it is not much difference between APP.
you just have to follow the instruction.
these are the normal way they use to configure the camera with WIFI.
1 Scan code to add ·Please make your phone connect to the Wi-Fi. ·Select your own 2.4GWi-Fi and enter your password.
. ·Scan the camera lens toward the QR code of the phone,(Align the QR code with camera lens at a distance of 10-20cm)Hear a voice prompt,Click"When you hear a beep or a green linght”after hearing the beep, Keep the camera cas close as possible to the router, The connection process takes about 1-2minutes,after you will hear welcome to use camera.
2 Addition of AP hotspot ·
Click the button in the upper right comer on the app homepage. ·Choose the Addition of AP hotspot,Plug in the power to the camera,Wait patienty for the device light to blink or hear a tone,Click Next when done. ·If you don’t see any tips,try resetting your device,Find the reset button,Long press for at least 5s,click next after prompted. ·please go to the Wi-Fi list and connect the Wi-Fi in the blue field “CLOUDCAM_XXXX” Select the Wi-Fi that matches the prefix and connect Return to APP after successful connection. ·After connecting the device successfully click next,Choose your router Wi-Fi,Enter Wi-Fi password,Click confirm,Addition is successful,then your can preview the screen.
3 Addition by connection to network cable (Only support Lan port device) ·
Click the button in the upper right comer on the app homepage. ·Choose the device type intelligent camera,choose the addition by connecting to network cable. ·Plug in the power to the camera,Device network port is connected to the network cable Scan device body QR code,put the QR code on the device body into the box and scan it. ·Please wait patiently ,The connection process takes about 1-2minutes,after you will hear welcome to use camera.
4 AP Direct mode (special)
·Open the YCC365plus app to enter the login interface, click “Local login” . ·Click the button in the upper right “+” on the app homepage. ·Click “AP networked device preview” and Click “Next” . ·Go to Setting Network click your phone connect to “CLOUDCAM_XXXX” network. ·Network setting set the Wi-Fi has been connected with this device and Click “Next” . ·Enter user Name: admin Password: 12345 Click “Next”, then your can preview the screen.
